نمایش بزرگتر
MCP2551-I/P
کد کالا: 10339
اوریجینال
دسته‌بندی: آی سی مدارهای واسطه و درایورها و فرستنده - گیرنده ها
موجودی: موجود
آی سی MCP2551-I/P یک درایور یا اینترفیس گیرنده/فرستنده برای پروتکل CAN نوع dip می باشد.
مستندات فنی و دیتاشیت
ویژگی های: MCP2551-I/P
مشخصات کلی
نوع نصب :
DIP
Package :
DIP-8
نوع :
تجاری
نوع عملکرد(Function Type) :
اینترفیس پروتکل CAN
دمای کاری(سانتیگراد) :
0 to 70
اطلاعات بیشتر
آی سی MCP2551-I/P یک درایور یا اینترفیس گیرنده/فرستنده برای پروتکل CAN نوع dip می باشد.
CAN Interface IC Hi Spd CAN Transceiver
Description:
The MCP2551 is a high-speed CAN, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus.
The MCP2551 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO-11898 standard, including 24V requirements.
It will operate at speeds of up to 1 Mb/s. Typically, each node in a CAN system must have a device to convert the digital signals generated by a CAN controller to signals suitable for transmission over the bus cabling (differential output).
It also provides a buffer between the CAN controller and the high-voltage spikes that can be generated on the CAN bus by outside sources (EMI, ESD, electrical transients, etc.).
Features:
• Supports 1 Mb/s operation
• Implements ISO-11898 standard physical layer requirements
• Suitable for 12V and 24V systems
• Externally-controlled slope for reduced RFI emissions
• Detection of ground fault (permanent dominant) on TXD input
• Power-on reset and voltage brown-out protection
• An unpowered node or brown-out event will not disturb the CAN bus
• Low current standby operation
• Protection against damage due to short-circuit conditions (positive or negative battery voltage)
• Protection against high-voltage transients
• Automatic thermal shutdown protection
• Up to 112 nodes can be connected
• High noise immunity due to differential bus implementation
ic:2
Description:
The MCP2551 is a high-speed CAN, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus.
The MCP2551 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO-11898 standard, including 24V requirements.
It will operate at speeds of up to 1 Mb/s. Typically, each node in a CAN system must have a device to convert the digital signals generated by a CAN controller to signals suitable for transmission over the bus cabling (differential output).
It also provides a buffer between the CAN controller and the high-voltage spikes that can be generated on the CAN bus by outside sources (EMI, ESD, electrical transients, etc.).
Features:
• Supports 1 Mb/s operation
• Implements ISO-11898 standard physical layer requirements
• Suitable for 12V and 24V systems
• Externally-controlled slope for reduced RFI emissions
• Detection of ground fault (permanent dominant) on TXD input
• Power-on reset and voltage brown-out protection
• An unpowered node or brown-out event will not disturb the CAN bus
• Low current standby operation
• Protection against damage due to short-circuit conditions (positive or negative battery voltage)
• Protection against high-voltage transients
• Automatic thermal shutdown protection
• Up to 112 nodes can be connected
• High noise immunity due to differential bus implementation
ic:2
سوکت آی سی 8 پین
@COMMENT_TITLE@
@COMMENT_COMMENT@