ماژول بلوتوث HC-05 همراه با برد کمکی
HC-05 – Bluetooth to Serial Port Module
ماژول بلوتوث HC-05 یک مبدل بلوتوث به سریال است که میکروکنترلرها (مانند آردوینو) را به سایر دستگاه های دارای بلوتوث متصل می کند.
مشخصات فنی HC-05
- ماژول بلوتوث سریال برای آردوینو و سایر میکروکنترلرها
- ولتاژ کاری : 3.3 تا 5 ولت
- جریان عملیاتی : 30 میلی آمپر
- محدوده عملکرد : کمتر از 100 متر
- عملکرد با ارتباط سریال (USART) و سازگار با TTL
- پیروی از پروتکل استاندارد IEEE 802.15.1
- استفاده از طیف گسترده فرکانس پرش (FHSS)
- توانایی عملکرد در حالت Master، Slave یا Master/Slave
- برقراری ارتباط با لپ تاپ یا تلفن های همراه بلوتوث دار
- پشتیبانی از :baud rate 9600,19200,38400,57600,115200,230400,460800.
Pin Configuration
| Pin Number | Pin Name | Description |
| 1 | Enable / Key | This pin is used to toggle between Data Mode (set low) and AT command mode (set high). By default it is in Data mode |
| 2 | Vcc | Powers the module. Connect to +5V Supply voltage |
| 3 | Ground | Ground pin of module, connect to system ground. |
| 4 | TX – Transmitter | Transmits Serial Data. Everything received via Bluetooth will be given out by this pin as serial data. |
| 5 | RX – Receiver | Receive Serial Data. Every serial data given to this pin will be broadcasted via Bluetooth |
| 6 | State | The state pin is connected to on board LED, it can be used as a feedback to check if Bluetooth is working properly. |
| 7 | LED |
|
| 8 | Button | Used to control the Key/Enable pin to toggle between Data and command Mode |