ورق جاذب LS-30 با ضخامت 0.125 اینچ مناسب برای فرکانس 1 تا 26 گیگاهرتز. این ورق ها در ابعاد 61x61 سانتیمتری توسط شرکت Eccosorb ارائه می گردند. از آنجا که قیت آنها بسیار زیاد می شود، فروشگاه آی سی کالابرای کاهش قیمت وسهولت خرید تصمیم بر آن گرفته است که این ورق ها را در ابعاد کوچکتر به فروش برساند. این اوراق در ابعاد 30x30 سانتیمتر در فروشگاه جهت استفاده کارشناسان و متخصصین موجود می باشد.
پارت نامبر این ورق جاذب در بعضی شرکت ها به اسم 78153073 نیز می باشد.
پارت نامبر این ورق جاذب در بعضی شرکت ها به اسم 78153073 نیز می باشد.
LS-30 .125X24X24 / ECCOSORB / UOM=EA
Applications
-ECCOSORB LS is used to lower cavity Q’s in RF amplifiers, oscillators, cabinets containing microwave devices, computer housings, LNB’s, and isolation of antennas by insertion loss
-ECCOSORB LS is also used to reduce surface currents on radiating elements and outer ground-plane type surfaces.
-Reflectivity of an object (metal or otherwise) can be reduced somewhat by applying one or more layers of ECCOSORB LS to its surface.
Availability
-Standard sheets are 24” x 24” (61 cm x 61 cm)
-Standard thicknesses are 1/8” (0.3cm), 1/4” (0.6cm),
3/8” (0.9cm), 1/2” (1.3cm) & 3/4” (1.8cm)
-Upon special request, ECCOSORB LS can be supplied with an anti-dust coating UMSEAL (UM), to prevent carbon fallout
-ECCOSORB LS can be supplied with a CERSEAL coating to prevent moisture uptake in high humidity to moderately wet environments upon special request
-For applications requiring ECCOSORB LS to be in close contact with electrical components, a PEF film is available on request to prevent electrical shorts
-ECCOSORB LS can also be supplied with a Pressure Sensitive Adhesive (PSA). Product designation denoting ECCOSORB LS with a PSA is ECCOSORB LS-XX/SS3
- ECCOSORB LS is available in other sizes and customer specified configurations upon request
Applications
-ECCOSORB LS is used to lower cavity Q’s in RF amplifiers, oscillators, cabinets containing microwave devices, computer housings, LNB’s, and isolation of antennas by insertion loss
-ECCOSORB LS is also used to reduce surface currents on radiating elements and outer ground-plane type surfaces.
-Reflectivity of an object (metal or otherwise) can be reduced somewhat by applying one or more layers of ECCOSORB LS to its surface.
Availability
-Standard sheets are 24” x 24” (61 cm x 61 cm)
-Standard thicknesses are 1/8” (0.3cm), 1/4” (0.6cm),
3/8” (0.9cm), 1/2” (1.3cm) & 3/4” (1.8cm)
-Upon special request, ECCOSORB LS can be supplied with an anti-dust coating UMSEAL (UM), to prevent carbon fallout
-ECCOSORB LS can be supplied with a CERSEAL coating to prevent moisture uptake in high humidity to moderately wet environments upon special request
-For applications requiring ECCOSORB LS to be in close contact with electrical components, a PEF film is available on request to prevent electrical shorts
-ECCOSORB LS can also be supplied with a Pressure Sensitive Adhesive (PSA). Product designation denoting ECCOSORB LS with a PSA is ECCOSORB LS-XX/SS3
- ECCOSORB LS is available in other sizes and customer specified configurations upon request