W&G OLP-18B - Handheld Optical Power Meter. 800 - 1700nM, -60 to +26 dBm
No. of Channels: 1ch
Wavelength: 800nm
Power: -60dBm
Optical Power Level Meters
- Power and Loss Measurements for installation, maintenance and repair of fiber optics networks
- Measurement of high power levels in CATV systems, EDFAs and high-power lasers
- Simultaneous attenuation measurement at two measurements
- In Twin test-mode two results at tow wavelenght are automatically stored
- Built-in results data memory; data recall and remote control via RS232 interface
- Operates from dry or rechargeable batteries or AC line
- Universal system of interchangeable adapters
The OLP-1XB series of Optical Power Meters are especially suitable for applications involving the installation, maintenance or repair of fiber optics networks, as they are both compact and easy to use. They can be used to make power and loss measurements in the wavelength range from 800 to 1700 nm.
The main areas of application for the individual instruments are determined by the required measurem Wavelength detection
Fiber detection
HOLD mode
LCD, 4-digit Display
Reference Level: -80 to +30dBm
Auto-Lambda mode
Fiber type: 9/125 to 50/125 um
Data memory: 1000 results
Measurement Accuracy: 3%
Performance Characteristics of the OLP-18B
Form Factor |
Benchtop |
Sensor Type |
InGaAs |
Number of Channels |
1 ch |
Minimum Wavelength |
800 nm |
Maximum Wavelength |
1700 nm |
Minimum Power |
0.001 uW |
Maximum Power |
0.39811 Watts |
Power Resolution |
0.01 dB |
Measurement Accuracy |
3 % |
Connector type (main signal) |
9-pin DIN,FC,SC,ST,SMA(APC/PC) |
W&G OLP-18B یک پاورتر آپتیکال دستی یک کانال برای طول موج های 800 تا 1700 نانو متر و توان 60dBm- تا 26dBm+ می باشد.